HG mould remover foam spray 500.00 Milliliter
HG mould remover foam spray 500.00 Milliliter
Regular price
€11,59
Sale price
€11,59
Regular price
€11,59
Tax included.
Shipping calculated at checkout.
Available in stock
HG Mould Remover Foam Spray
Biocide 14738N
HG Mould Remover Foam Spray immediately and easily destroys all moulds, causing the nasty black stains to disappear. Mould, damp or weather stains are common in silicone seals between the bathtub and tiled wall, in the shower cubicle and in plasterwork. This foam spray variant has a unique foam formula, which makes the foam adhere longer and ensures better and longer lasting action. In addition, the product has a less pungent odour, can be directed more accurately at the mould and is less likely to splash.
HG mould remover foam spray immediately and easily destroys all moulds, causing the nasty black stains to disappear.
Legal instructions for use
It is only permitted for use as a mould control agent (black residue) in damp places. The instructions for use must be followed. The agent is intended for non-professional use only.
Use biocides safely. Always read the label and product information before use.
Composition
Sodium hypochlorite 4.2% (AS ACTIVE CHLORINE).
Dosage/use
If you have used the bottle before, there may be residual liquid in the spray nozzle, which could impair its function upon reuse. We therefore recommend that you always rinse the spray nozzle thoroughly with hot tap water before reuse, for example, through the ventilation holes on
the side of the foam nozzle. The product has a bleaching effect; if in doubt, test in an inconspicuous area first. Do not remove mould beforehand. Press the nipple on the front and turn it a quarter turn. Spray the surface from a distance of 3-5 cm. For stubborn dirt, spray again after 30 minutes and let it act for 30 minutes. Clean the sprayed surface with water and a sponge. Wash off elastic joints (e.g. silicone sealant) after approx. 30 minutes and spray again. After use, turn the nipple back a quarter turn (locked position). For cleaning large areas with green residue, we recommend HG "green deposit cleaner".
Consumption: 2-3 m2 wall surface, 6-8 m2 tile joints
Warnings
It is advisable to ventilate well and wear rubber/plastic gloves during use. Avoid splashing on clothing; (high) gloss paint and blinds. In case of contact, rinse immediately with water. Avoid contact with metals such as prints on decorative strips, aluminium and stainless steel. Do not treat coloured surfaces. We advise against using this product on (sprayed) ceilings.
After use, slight elastic joints (e.g. silicone sealant) may sometimes show some permanent brown
discoloration. On poorly glazed tiles and old tiles with hairline cracks, brown discoloration may occur. This brown colour can be removed with Hypo (sodium thiosulphate). The bottle must not be reused. Transport and store cool, dark and upright. Shelf life: See
bottom of the bottle. If stored at 20°C in the dark. Longer shelf life at lower temperatures.
Biocide 14738N
HG Mould Remover Foam Spray immediately and easily destroys all moulds, causing the nasty black stains to disappear. Mould, damp or weather stains are common in silicone seals between the bathtub and tiled wall, in the shower cubicle and in plasterwork. This foam spray variant has a unique foam formula, which makes the foam adhere longer and ensures better and longer lasting action. In addition, the product has a less pungent odour, can be directed more accurately at the mould and is less likely to splash.
HG mould remover foam spray immediately and easily destroys all moulds, causing the nasty black stains to disappear.
Legal instructions for use
It is only permitted for use as a mould control agent (black residue) in damp places. The instructions for use must be followed. The agent is intended for non-professional use only.
Use biocides safely. Always read the label and product information before use.
Composition
Sodium hypochlorite 4.2% (AS ACTIVE CHLORINE).
Dosage/use
If you have used the bottle before, there may be residual liquid in the spray nozzle, which could impair its function upon reuse. We therefore recommend that you always rinse the spray nozzle thoroughly with hot tap water before reuse, for example, through the ventilation holes on
the side of the foam nozzle. The product has a bleaching effect; if in doubt, test in an inconspicuous area first. Do not remove mould beforehand. Press the nipple on the front and turn it a quarter turn. Spray the surface from a distance of 3-5 cm. For stubborn dirt, spray again after 30 minutes and let it act for 30 minutes. Clean the sprayed surface with water and a sponge. Wash off elastic joints (e.g. silicone sealant) after approx. 30 minutes and spray again. After use, turn the nipple back a quarter turn (locked position). For cleaning large areas with green residue, we recommend HG "green deposit cleaner".
Consumption: 2-3 m2 wall surface, 6-8 m2 tile joints
Warnings
It is advisable to ventilate well and wear rubber/plastic gloves during use. Avoid splashing on clothing; (high) gloss paint and blinds. In case of contact, rinse immediately with water. Avoid contact with metals such as prints on decorative strips, aluminium and stainless steel. Do not treat coloured surfaces. We advise against using this product on (sprayed) ceilings.
After use, slight elastic joints (e.g. silicone sealant) may sometimes show some permanent brown
discoloration. On poorly glazed tiles and old tiles with hairline cracks, brown discoloration may occur. This brown colour can be removed with Hypo (sodium thiosulphate). The bottle must not be reused. Transport and store cool, dark and upright. Shelf life: See
bottom of the bottle. If stored at 20°C in the dark. Longer shelf life at lower temperatures.
