HG Mould, Mildew & Damp Stain Remover 500.00 Milliliters
HG Mould, Mildew & Damp Stain Remover 500.00 Milliliters
Regular price
€10,29
Sale price
€10,29
Regular price
€10,29
Tax included.
Shipping calculated at checkout.
Available in stock
HG mould, damp and mildew stain remover
Biocide 9793N
HG mould, damp & mildew stain remover
HG mould, damp & mildew stain remover immediately destroys mould in damp places, inside and outside. For cleaning tiled walls (also suitable for marble) and grouting in the bathroom, shower, toilet, kitchen, cellar, basement, sauna, swimming pool, garage, shed. Also cleans facades, balconies, planters, garden statues, etc. HG mould, damp & mildew stain remover bleaches grey and black mouldy areas.
Legal instructions for use
It is only permitted to use this product as a means of combating mould (black stains) in damp places. The instructions for use must be followed. The product is exclusively intended for non-professional use.
Use biocides safely. Always read the label and product information before use.
Composition
Active substance and content: Sodium hypochlorite 49g/litre (as active chlorine) Contains anionic surfactants: <5%
Dosage/use
Remove the lock before use. The product has a bleaching effect, if in doubt, test it first in an inconspicuous place. Do not remove mould beforehand. Press the nozzle on the front and turn it a quarter turn. Spray the surface from a distance of 3-5 cm. For stubborn dirt, spray again after 30 minutes and leave to work for 30 minutes. Clean the sprayed surface with water and a sponge.
Wash off elastic joints (e.g. silicone sealant) after approx. 30 minutes and spray again. After use, turn the nozzle back a quarter turn (locked position).
Consumption: 2-3m2 wall surface, 6-8m2 tile joints.
Warnings
It is advisable to ventilate well and wear rubber/plastic gloves during use. Avoid splashing on clothing, paintwork, plastic shower trays and blinds. In case of contact, rinse immediately with water.
Avoid contact with metals such as prints on decorative strips, aluminium and stainless steel. Do not treat coloured surfaces. We do not recommend the use of this product on ceilings. After use, some permanent brown discolouration may sometimes occur on light elastic joints (e.g. silicone sealant). Brown discolouration may occur on poorly glazed tiles and old tiles with hairline cracks. This brown colour can be removed with Hypo (sodium thiosulphate), available on request from the HG consumer service department. The bottle must not be reused.
Biocide 9793N
HG mould, damp & mildew stain remover
HG mould, damp & mildew stain remover immediately destroys mould in damp places, inside and outside. For cleaning tiled walls (also suitable for marble) and grouting in the bathroom, shower, toilet, kitchen, cellar, basement, sauna, swimming pool, garage, shed. Also cleans facades, balconies, planters, garden statues, etc. HG mould, damp & mildew stain remover bleaches grey and black mouldy areas.
Legal instructions for use
It is only permitted to use this product as a means of combating mould (black stains) in damp places. The instructions for use must be followed. The product is exclusively intended for non-professional use.
Use biocides safely. Always read the label and product information before use.
Composition
Active substance and content: Sodium hypochlorite 49g/litre (as active chlorine) Contains anionic surfactants: <5%
Dosage/use
Remove the lock before use. The product has a bleaching effect, if in doubt, test it first in an inconspicuous place. Do not remove mould beforehand. Press the nozzle on the front and turn it a quarter turn. Spray the surface from a distance of 3-5 cm. For stubborn dirt, spray again after 30 minutes and leave to work for 30 minutes. Clean the sprayed surface with water and a sponge.
Wash off elastic joints (e.g. silicone sealant) after approx. 30 minutes and spray again. After use, turn the nozzle back a quarter turn (locked position).
Consumption: 2-3m2 wall surface, 6-8m2 tile joints.
Warnings
It is advisable to ventilate well and wear rubber/plastic gloves during use. Avoid splashing on clothing, paintwork, plastic shower trays and blinds. In case of contact, rinse immediately with water.
Avoid contact with metals such as prints on decorative strips, aluminium and stainless steel. Do not treat coloured surfaces. We do not recommend the use of this product on ceilings. After use, some permanent brown discolouration may sometimes occur on light elastic joints (e.g. silicone sealant). Brown discolouration may occur on poorly glazed tiles and old tiles with hairline cracks. This brown colour can be removed with Hypo (sodium thiosulphate), available on request from the HG consumer service department. The bottle must not be reused.
