HG Natural Stone Protector Shine 1.00 Litre
HG Natural Stone Protector Shine 1.00 Litre
Regular price
€23,29
Sale price
€23,29
Regular price
€23,29
Tax included.
Shipping calculated at checkout.
Low stock
HG Natural Stone Protector Gloss
HG natural stone protector is an easy to apply polymer emulsion. After drying, this emulsion forms a glossy and wafer-thin, yet extremely strong protective film. Perfect for protecting marble or natural stone with a glossy finish.
Protect and simultaneously make your natural stone floor glossy? The use of this natural stone protector protects the top layer of the natural stone against wear and tear and damage or deterioration by acids, such as soft drinks and wine. This protective film for natural stone also provides an anti-slip effect. 1 liter is sufficient for approximately 60 to 80m2 per layer.
Ingredients
Contains, among others: Phosphates <5% Preservatives: Benzisothiazolinone, methylisothiazolinone
Instructions
Follow the steps below to protect your natural stone against wear and tear and damage using HG natural stone protector (product 33): 1. The surface must be completely clean, free of grease and dust. 2. For good distribution, preferably use a wax applicator. If desired, a non-fluffy, clean (tea) towel wrapped around a squeegee can also be used. On a coarse surface, use a paint roller (sheepskin roller), but avoid excessive foaming during application with the roller. 3. Dilute HG natural stone protector 1 to 1 with cold water. 4. Pour this solution of the natural stone protector onto the floor and spread it in one direction over the natural stone floor using a wax applicator or roller. 5. After approximately 40 minutes, a second layer can be applied at right angles to the first layer.
Warnings
H317- May cause an allergic skin reaction. H319- Causes serious eye irritation. P101- If medical advice is needed, have product container or label at hand. P102- Keep out of reach of children. P280- Wear protective gloves. P305+P351+P338- IF IN EYES: Rinse cautiously with water for several minutes; remove contact lenses, if present and easy to do. Continue rinsing. P333+P313- If skin irritation or rash occurs: Get medical advice/attention. P501- Dispose of contents/container to hazardous or special waste collection point. Contains: Rosin, fumaric acid treated, polymer with glycerol, ammonium salt CAS: 68554-18-7.
Manufacturer / Distributor
HG International BV
HG natural stone protector is an easy to apply polymer emulsion. After drying, this emulsion forms a glossy and wafer-thin, yet extremely strong protective film. Perfect for protecting marble or natural stone with a glossy finish.
Protect and simultaneously make your natural stone floor glossy? The use of this natural stone protector protects the top layer of the natural stone against wear and tear and damage or deterioration by acids, such as soft drinks and wine. This protective film for natural stone also provides an anti-slip effect. 1 liter is sufficient for approximately 60 to 80m2 per layer.
Ingredients
Contains, among others: Phosphates <5% Preservatives: Benzisothiazolinone, methylisothiazolinone
Instructions
Follow the steps below to protect your natural stone against wear and tear and damage using HG natural stone protector (product 33): 1. The surface must be completely clean, free of grease and dust. 2. For good distribution, preferably use a wax applicator. If desired, a non-fluffy, clean (tea) towel wrapped around a squeegee can also be used. On a coarse surface, use a paint roller (sheepskin roller), but avoid excessive foaming during application with the roller. 3. Dilute HG natural stone protector 1 to 1 with cold water. 4. Pour this solution of the natural stone protector onto the floor and spread it in one direction over the natural stone floor using a wax applicator or roller. 5. After approximately 40 minutes, a second layer can be applied at right angles to the first layer.
Warnings
H317- May cause an allergic skin reaction. H319- Causes serious eye irritation. P101- If medical advice is needed, have product container or label at hand. P102- Keep out of reach of children. P280- Wear protective gloves. P305+P351+P338- IF IN EYES: Rinse cautiously with water for several minutes; remove contact lenses, if present and easy to do. Continue rinsing. P333+P313- If skin irritation or rash occurs: Get medical advice/attention. P501- Dispose of contents/container to hazardous or special waste collection point. Contains: Rosin, fumaric acid treated, polymer with glycerol, ammonium salt CAS: 68554-18-7.
Manufacturer / Distributor
HG International BV
