{"product_id":"microlife-mic-bpb3-basic-bloeddrukmonitor-1-stuks","title":"Microlife MIC BPB3 Basic blood pressure monitor 1 Piece","description":"\u003cb\u003eMicrolife MIC BPB3 Basic blood pressure monitor\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e Microlife MIC BPB3 Basic blood pressure monitor\u003cbr\u003e Operating conditions: 10 - 40 °C \/ 50 - 104 °F\u003cbr\u003e 15-90% maximum relative humidity\u003cbr\u003e Weight: 277 g (including batteries)\u003cbr\u003e Dimensions: 131 x 90 x 60.5 mm\u003cbr\u003e Cuff dimensions: from 17 - 52 cm\u003cbr\u003e Measurement procedure: oscillometric, according to Korotkoff\u003cbr\u003e method: Phase I systolic Phase V diastolic\u003cbr\u003e Measuring range: SYS: 60 - 255 mmHg\u003cbr\u003e DIA: 40 - 200mmHg\u003cbr\u003e Pulse rate: 40 - 199 beats per minute\u003cbr\u003e Cuff pressure display range: 0 - 299 mmHg\u003cbr\u003e Resolution: 1 mmHg\u003cbr\u003e Static accuracy: within ± 3 mmHg\u003cbr\u003e Heart rate accuracy: ±5% of displayed value\u003cbr\u003e Power source: 4 x 1.5V alkaline batteries; type AA\u003cbr\u003e Power adapter DC 6V, 600 mA (optional)\u003cbr\u003e Battery life: approximately 920 measurements (with new\u003cbr\u003e batteries)\u003cbr\u003e IP Class: IP 20\r \u003cbr\u003eReference to standards:\u003cbr\u003e IEC 80601-2-30; IEC 60601-1;\u003cbr\u003e IEC 60601-1-2 (EMC); IEC 60601-1-11\u003cbr\u003e\u003cbr\u003e Expected lifespan:\u003cbr\u003e Device: 5 years or 10,000 measurements, whichever comes first.\u003cbr\u003e Accessories: 2 years or 5000 measurements, whichever comes first\u003cbr\u003e\u003cbr\u003e This device complies with the standards of the Medical Device Directive 93\/42\/EEC.\u003cbr\u003e Technical changes reserved.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eWhat is this medicine used for?\u003c\/b\u003e\u003cbr\u003e Measuring blood pressure.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eDirections for use\u003c\/b\u003e\u003cbr\u003e Installing the batteries\u003cbr\u003e After unpacking the device, first insert the batteries.\u003cbr\u003e The battery compartment 7 is located on the bottom of\u003cbr\u003e the device. Insert the batteries (4 x 1.5 V, size AA), taking care\u003cbr\u003e on the indicated polarity.\u003cbr\u003e\u003cbr\u003e Setting the date and time\u003cbr\u003e 1. After inserting the batteries, the year will flash on the display. You can set the year by pressing the M button 3. To confirm and then set the month, press the time button 4.\r \u003cbr\u003e2. Now you can set the month using the M button. Press the time button to confirm, then set the day.\u003cbr\u003e 3. Follow the instructions above to set the day, hour and minutes.\u003cbr\u003e 4. Once you have set the minutes and pressed the time button, the date and time are set and the time is displayed.\u003cbr\u003e 5. To change the date and time, press and hold the time button for about 3 seconds until the year starts flashing. You can then enter new values ​​as described above.\u003cbr\u003e\u003cbr\u003e Select the correct cuff\u003cbr\u003e Microlife offers cuffs in various sizes. Select the cuff size that corresponds to your upper arm circumference (the circumference measured around the middle of your upper arm).\u003cbr\u003e If the enclosed cuff 8 does not fit, please contact your Microlife importer.\u003cbr\u003e Attach the cuff to the device using the cuff connector 9 and push the connector 5 as far as possible into the device.\u003cbr\u003e\u003cbr\u003e Cuff size for upper arm circumference\u003cbr\u003e S 17 - 22 cm\u003cbr\u003e M 22 - 32 cm\u003cbr\u003e M - L 22 - 42 cm\u003cbr\u003e L 32 - 42 cm\r \u003cbr\u003eL - XL 32 - 52 cm\u003cbr\u003e\u003cbr\u003e Pre-formed cuffs are optionally available.\u003cbr\u003e Use only Microlife cuffs!\u003cbr\u003e\u003cbr\u003e Step-by-step plan for reliable blood pressure measurement\u003cbr\u003e Avoid activity, eating, or smoking immediately before a measurement.\u003cbr\u003e Sit in a chair with back support and relax for 5 minutes.\u003cbr\u003e Keep your feet together on the floor and do not sit with your legs crossed.\u003cbr\u003e Always measure on the same arm (normally the left). It's recommended that doctors measure both arms during a patient's first visit to determine which arm to measure. The arm with the higher blood pressure should be measured.\u003cbr\u003e Remove clothing covering the upper arms; sleeves should not be rolled up to avoid pinching.\u003cbr\u003e Always ensure that the correct cuff size is used (arm circumference marking is stated on the cuff).\u003cbr\u003e Fasten the cuff around the arm, but not too tightly.\u003cbr\u003e Make sure the cuff is positioned 1-2 cm above your elbow.\r \u003cbr\u003eThe artery mark on the cuff (approx. 3 cm long bar) should be placed on the vein of the arm (inside).\u003cbr\u003e Support your arm so that it is relaxed.\u003cbr\u003e Make sure the cuff is at the same height as your heart\u003cbr\u003e\u003cbr\u003e Measure blood pressure\u003cbr\u003e 1. Press the ON\/OFF button 1 to start the measurement.\u003cbr\u003e 2. The cuff will now automatically inflate. Relax,\u003cbr\u003e Do not move or tense your arm muscles until the measurement result is displayed. Breathe normally and do not talk.\u003cbr\u003e 3. When the cuff is positioned correctly, the Cuff Check Indicator AR symbol will appear on the screen. When the symbol\u003cbr\u003e Cuff position check AR-A appears on the screen, the cuff\u003cbr\u003e moderately placed but still allows for accurate blood pressure measurement.\u003cbr\u003e 4. When the correct pressure is reached, pumping stops and the pressure gradually decreases. If the desired pressure is not reached, the device will automatically inflate the cuff.\u003cbr\u003e 5. During the measurement, the heart rate symbol AQ flashes on the display.\r \u003cbr\u003e6. The result, including the systolic AK and diastolic AL blood pressure and the heart rate AM is displayed.\u003cbr\u003e Also consult this manual for explanations of the other views.\u003cbr\u003e 7. When the measurement is complete, remove the cuff.\u003cbr\u003e 8. Turn off the device. (The monitor will turn off automatically after approximately 1 minute.)\u003cbr\u003e You can stop the measurement at any time by pressing the ON\/OFF button or opening the cuff (e.g. if you feel discomfort or notice an unpleasant pressure).\u003cbr\u003e This meter has been specifically tested for use during pregnancy and preeclampsia. If you experience unusually high readings, you should repeat the test after a certain amount of time (e.g., 1 hour). If the reading is still too high, consult your doctor or gynecologist.\u003cbr\u003e\u003cbr\u003e Manually set inflation\r \u003cbr\u003eIn the case of high systolic blood pressure (e.g., above 135 mmHg), it may be beneficial to set the pressure manually. Press the ON\/OFF button when the blood pressure monitor is inflated to approximately 30 mmHg. Hold the button down until the pressure is approximately 40 mmHg higher than the expected systolic value, then release the button.\u003cbr\u003e\u003cbr\u003e Perform a measurement without saving it\u003cbr\u003e Once the measurement is completed and the result is displayed, press and hold the ON\/OFF button 1 until the \"M\" symbol appears on the display. Then press the time button 4 to delete the measurement and not save it.\u003cbr\u003e When the measurement is successfully removed, «CL» will appear in the display\u003cbr\u003e\u003cbr\u003e How do I measure my blood pressure?\u003cbr\u003e The triangular symbol on the left in the display AO applies to the classification of home-measured blood pressure values ​​in adults in accordance with international guidelines (ESH, ESC,\r \u003cbr\u003eJSH). Blood pressure: Optimal (white), elevated (shaded gray), or too high (black). Values ​​in mmHg.\u003cbr\u003e\u003cbr\u003e Range Systolic Diastolic Advice\u003cbr\u003e 1. blood pressure too high \u0026gt;\/= 135 \u0026gt;\/= 85 Seek medical advice\u003cbr\u003e 2. Blood pressure increased 130 - 134 80 - 84 Self-control\u003cbr\u003e 3. Blood pressure normal \u0026lt;130 \u0026lt;80 Self-check\u003cbr\u003e\u003cbr\u003e The evaluation of the values ​​is in accordance with the table. For example:\u003cbr\u003e a blood pressure value of 140\/80 mmHg or a value\u003cbr\u003e of 130\/90 mmHg shows \"blood pressure too high\".\u003cbr\u003e\u003cbr\u003e Appearance of the irregular heartbeat (IHB) symbol\u003cbr\u003e This BT symbol indicates that there is an irregular heartbeat\u003cbr\u003e detected. In this case, the measured blood pressure may deviate from\u003cbr\u003e your actual blood pressure values. It is recommended to\u003cbr\u003e repeat measurement.\u003cbr\u003e\u003cbr\u003e Information for the doctor in case of repeated\u003cbr\u003e appearance of the IHB symbol\u003cbr\u003e This device is an oscillometric blood pressure monitor that also\r \u003cbr\u003emeasures pulse during blood pressure measurement and indicates when the heartbeat is irregular\u003cbr\u003e\u003cbr\u003e Memory storage\u003cbr\u003e This device stores the last 30 measurements.\u003cbr\u003e\u003cbr\u003e Viewing the saved values\u003cbr\u003e When the device is turned off, press the M button 3. The display will first show \"M\" AP and \"A,\" which represents the average of all stored values.\u003cbr\u003e Pressing the M button again displays the previous value. Pressing the M button again scrolls through the measurement results.\u003cbr\u003e\u003cbr\u003e Clear all values\u003cbr\u003e If you are sure you want to permanently delete all stored values, press and hold the M button (turn the device off first) until \"CL ALL\" appears, then release the button. To permanently erase the memory, press the time button while \"CL ALL\" is flashing. Individual measurements cannot be deleted.\u003cbr\u003e\u003cbr\u003e Cancel delete: Press the ON\/OFF button 1 while «CL ALL» is flashing.\u003cbr\u003e\u003cbr\u003e Battery indicator and battery replacement\u003cbr\u003e Batteries low\r \u003cbr\u003eWhen the batteries are approximately ¾ empty, the battery symbol AN will flash as soon as the device is switched on\u003cbr\u003e (partially charged battery is displayed). Although the\u003cbr\u003e device will continue to measure reliably you must replace batteries\u003cbr\u003e to be replaced soon.\u003cbr\u003e Batteries empty – replacement\u003cbr\u003e When the batteries are empty, the battery symbol AN will flash as soon as the device is turned on (low battery displayed). You cannot continue measuring and must replace the batteries.\u003cbr\u003e 1. Open the battery compartment 7 on the back of the device.\u003cbr\u003e 2. Replace the batteries – check correct polarity as shown\u003cbr\u003e shown by the symbols in the compartment.\u003cbr\u003e 3. To set the date and time, follow the procedure as\u003cbr\u003e described in Section «First use of the appliance».\u003cbr\u003e\u003cbr\u003e Which batteries and which method?\u003cbr\u003e Use 4 new, long-life 1.5V, type AA alkaline batteries.\u003cbr\u003e Do not use batteries that have passed their expiration date.\u003cbr\u003e has passed.\u003cbr\u003e Remove the batteries if the device is not to be used for a long period of time.\r \u003cbr\u003etime will not be used\u003cbr\u003e\u003cbr\u003e Use of rechargeable batteries\u003cbr\u003e You can also use rechargeable batteries for this device\u003cbr\u003e Please use only rechargeable batteries of the type \"NiMH\"!\u003cbr\u003e The batteries should be removed and charged if\u003cbr\u003e the battery symbol (battery empty) appears! They should not\u003cbr\u003e remain in the appliance, as they may be damaged\u003cbr\u003e (complete discharge due to minimal use)\u003cbr\u003e of the device, even when it is switched off).\u003cbr\u003e Always remove the rechargeable batteries if you do not intend to use them.\u003cbr\u003e You can use the device for a week or longer!\u003cbr\u003e The batteries cannot be charged in the blood pressure monitor! Charge these batteries in an external\u003cbr\u003e charger and observe the information regarding the\u003cbr\u003e charging, maintenance and sustainability!\u003cbr\u003e\u003cbr\u003e Using an AC adapter\u003cbr\u003e You can power this device with the Microlife power adapter (DC 6V, 600 mA)\u003cbr\u003e to use.\u003cbr\u003e Use only the original available Microlife\u003cbr\u003e power adapter for your supply voltage.\r \u003cbr\u003eCheck that both the AC adapter and the cable are not\u003cbr\u003e be damaged\u003cbr\u003e 1. Plug the adapter cable into the power adapter socket 6 of the\u003cbr\u003e blood pressure monitor.\u003cbr\u003e 2. Plug the power adapter into the wall socket.\u003cbr\u003e When the AC adapter is connected, no battery power is used.\u003cbr\u003e\u003cbr\u003e For explanation of error messages in the device, please consult the package insert\/manual.\u003cbr\u003e\u003cbr\u003e Safety, maintenance, accuracy testing and disposal\u003cbr\u003e Follow the instructions for proper use. This documentation provides you with important operating and safety instructions for this appliance. Read this documentation carefully before using the appliance and keep it for future reference.\u003cbr\u003e This appliance may only be used for its intended purpose as described in the instructions for use. The manufacturer is not liable for damage caused by improper use.\r \u003cbr\u003eThis device contains sensitive components and must be handled with care. Follow the storage and operating instructions as described in the chapter\u003cbr\u003e\u003cbr\u003e Technical specifications!\u003cbr\u003e The cuff is fragile and must be handled with care.\u003cbr\u003e Only inflate the cuff when it is applied to the arm.\u003cbr\u003e Do not use the appliance if you suspect it is damaged or if you notice anything unusual during use.\u003cbr\u003e Never open the appliance.\u003cbr\u003e Please read further safety instructions in the individual sections of this booklet.\u003cbr\u003e The results measured with this device do not constitute a diagnosis.\u003cbr\u003e It does not replace a doctor's consultation, especially when\u003cbr\u003e symptoms do not match. Do not rely solely on the\u003cbr\u003e measurement result, always consider the other symptoms as well as the feedback\u003cbr\u003e\r \u003cbr\u003eOnly allow children to use the device under adult supervision. Small parts can be swallowed. Be aware of the risk of entanglement if the device is equipped with cables or hoses.\u003cbr\u003e\u003cbr\u003e Device maintenance\u003cbr\u003e Clean the appliance only with a soft, dry cloth.\u003cbr\u003e Clean the cuff\u003cbr\u003e The cuff supplied with the device is washable.\u003cbr\u003e 1. Remove the cuff connector 9 from the cuff hose AT\u003cbr\u003e and gently pull the balloon through the opening.\u003cbr\u003e 2. Do not wash the cuff cover warmer than 30 °C.\u003cbr\u003e 3. Dry the cuff with a dry cloth.\u003cbr\u003e 4. Insert the balloon back into the cuff cover through the opening and gently press the balloon flat.\u003cbr\u003e 5. Reattach the cuff connector to the cuff tube\u003cbr\u003e\u003cbr\u003e \u003cb\u003eContraindications\u003c\/b\u003e\u003cbr\u003e Do not use this device if the patient's condition meets the following contraindications to avoid inaccurate measurements or injury.\r \u003cbr\u003eThe device is not intended for measuring blood pressure in pediatric patients under 12 years of age (children, infants, or neonates).\u003cbr\u003e The presence of significant cardiac arrhythmias during measurement can disrupt blood pressure measurements and affect their reliability. Consult your doctor to determine whether the device is suitable for use in this situation.\u003cbr\u003e The device measures blood pressure using a pressure cuff. If the limb being measured is injured (e.g., open wounds) or is under conditions or treatments (e.g., intravenous infusion) that make it unsuitable for surface contact or pressure application, do not use the device to avoid worsening the injury or condition.\u003cbr\u003e Patient movements during measurement can disrupt the measurement process and affect the results.\r \u003cbr\u003eAvoid measuring patients with conditions, illnesses, and patients susceptible to environmental conditions that cause uncontrollable movements (e.g., tremors or shaking) and patients who cannot communicate clearly (e.g., children and unconscious patients).\u003cbr\u003e The device uses an oscillometric method to determine blood pressure. The arm being measured must have normal blood flow. The device is not intended for use on a limb with limited or impaired blood circulation. If you have circulatory or blood disorders, consult your doctor before using the device.\u003cbr\u003e Avoid measurements on the arm on the side of a mastectomy or lymph node removal.\u003cbr\u003e Do not use this device in a moving vehicle (for example, in a car or airplane).\u003cbr\u003e\u003cbr\u003e \u003cb\u003eIngredients\u003c\/b\u003e\u003cbr\u003e Blood pressure monitor with cuff\u003cbr\u003e\u003cbr\u003e \u003cb\u003eWarnings\u003c\/b\u003e\u003cbr\u003e Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.\u003cbr\u003e\r \u003cbr\u003eThis device may only be used for its intended purpose as described in this manual. The manufacturer cannot be held liable for damage caused by improper use.\u003cbr\u003e\u003cbr\u003e Do not change the patient's medication and treatment based on the results of one or more measurements. Changes in treatment and medication may only be made\u003cbr\u003e prescribed by a medical professional.\u003cbr\u003e Inspect the device, cuff, and other components for damage. DO NOT use the device, cuff, or any components if they appear damaged or are not functioning properly.\u003cbr\u003e Prolonged interruption of blood flow reduces peripheral circulation and can cause tissue damage. Be aware of signs (e.g., tissue discoloration) of compromised peripheral circulation when taking measurements continuously or over extended periods.\r \u003cbr\u003eProlonged exposure to cuff pressure will reduce peripheral perfusion and may lead to injury. Avoid situations where prolonged cuff pressure exceeds normal readings.\u003cbr\u003e In case of abnormally long pressure application, interrupt the measurement or loosen the cuff to reduce the pressure in the cuff.\u003cbr\u003e Do not use this device in an oxygen rich environment or near flammable gas.\u003cbr\u003e This device is not water-resistant or waterproof. Do not spill anything on the device or immerse it in water or other liquids.\u003cbr\u003e Do not disassemble or attempt to repair the appliance, accessories or parts during use or storage.\u003cbr\u003e Access to the device's internal hardware and software is prohibited. Unauthorized access to and maintenance of the device during use or storage may compromise its safety and performance.\r \u003cbr\u003eKeep the device out of reach of children and people unable to operate it. Beware of the risk of accidental swallowing of small parts and strangulation from the cables and hoses of this device and its accessories.\u003cbr\u003e\u003cbr\u003e Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury to the user or patient, or damage to the device or other property.\u003cbr\u003e The device is only intended for measuring blood pressure on the upper arm. Do not measure anywhere else, as the measurement will not accurately reflect your blood pressure.\u003cbr\u003e After a measurement is completed, release the cuff and rest for \u0026gt;5 minutes to allow limb perfusion to recover before taking another measurement.\u003cbr\u003e Do not use this device simultaneously with other medical electrical (ME) equipment. This may cause device malfunction or measurement inaccuracies.\r \u003cbr\u003eDo not use this device near radiofrequency (HF) surgical equipment, magnetic resonance imaging (MRI) equipment, and computed tomography (CT) scanners.\u003cbr\u003e This may cause malfunctions in the device and inaccuracies in measurements.\u003cbr\u003e Use and store the device, cuff, and components under the temperature and humidity conditions specified in the \"Technical Specifications.\" Do not use or store the device, cuff, or components in conditions outside the range specified in the \"Technical Specifications.\"\u003cbr\u003e specifications» may lead to malfunctions of the device and affect the safety of use.\u003cbr\u003e To prevent damage to the device, protect the device and accessories from the following:\u003cbr\u003e - water, other liquids and moisture\u003cbr\u003e - extreme temperatures\u003cbr\u003e - impact and vibrations\u003cbr\u003e - direct sunlight\u003cbr\u003e - pollution and dust\u003cbr\u003e - Stop using this device and the cuff and consult your doctor if you experience any skin irritation or discomfort.\u003cbr\u003e\r \u003cbr\u003eInformation on electromagnetic compatibility\u003cbr\u003e This appliance complies with EN60601-1-2: 2015 Electromagnetic\u003cbr\u003e standard electromagnetic interference.\u003cbr\u003e\u003cbr\u003e This device is not certified for use near\u003cbr\u003e high-frequency (HF) medical equipment.\u003cbr\u003e Do not use this device near strong electromagnetic fields and portable radio frequency communication devices (e.g. microwave ovens and mobile devices). Store in a cool, dry place.\u003cbr\u003e use this appliance at a minimum distance of 0.3 m from\u003cbr\u003e such devices.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eStorage advice\u003c\/b\u003e\u003cbr\u003e Storage conditions: -20 - +55 °C \/ -4 - +131 °F\u003cbr\u003e 15-90% maximum relative humidity\u003cbr\u003e\u003cbr\u003e \u003cb\u003eOther information\u003c\/b\u003e\u003cbr\u003e Medical device. Read the instructions for use before use.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eManufacturer \/ Distributor\u003c\/b\u003e\u003cbr\u003e Microlife Corp.,\n 9F, 431, Ruiguang Road, NeiHu,\n Taipei 11492, Taiwan, China","brand":"Microlife","offers":[{"title":"1 Piece","offer_id":56958291804505,"sku":"118244","price":58.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0971\/4843\/6825\/files\/4719003342821_A1N1.png?v=1775613121","url":"https:\/\/cleanpharma.nl\/en\/products\/microlife-mic-bpb3-basic-bloeddrukmonitor-1-stuks","provider":"CleanPharma","version":"1.0","type":"link"}